How to Prevent Sulfide Stress Cracking (SSC) in Split Tees, Valves, and Welds Under High H₂S Conditions NACE Requirements for Sour Gas Hot Tapping Introduction: What This Guide Covers Hot tapping on sour gas pipelines requires strict compliance with NACE MR0175/ISO 15156. This guide provides material selection specifications, hardness control strategies with verified limits, SSC
What Is Hot Tapping in High-Pressure Gas Pipelines? Hot tapping is a method of connecting to or modifying a live pipeline without shutting down flow. In 10MPa+ gas pipelines, it requires controlled welding procedures to prevent burn-through and hydrogen-induced cracking (HIC) due to high pressure and rapid cooling effects caused by high-velocity internal gas flow.
Pipe rehabilitation can fix most non-collapsed pipeline damage, including cracks, pinhole leaks, joint separation, root intrusion, corrosion, minor deformation, and leaking service connections. It uses trenchless methods like CIPP lining or epoxy coatings to restore structural integrity without excavation, typically reducing costs by 40–60% compared to replacement. What Is Pipe Rehabilitation:Pipe rehabilitation is a trenchless
What Types of Pipe Damage Can Be Repaired Without Excavation? Read More »
This guide explains the six main causes of pipeline deterioration, how each mechanism works, and how to prevent failure in aging pipeline systems. What causes pipelines to deteriorate over time? Pipelines deteriorate over time due to six primary mechanisms: Among these, corrosion alone accounts for nearly 50% of all pipeline failures globally. Understanding these mechanisms
What Causes Pipelines to Deteriorate Over Time? 6 Primary Failure Mechanisms Read More »
When Should a Pipeline Be Repaired Instead of Replaced? A pipeline repair decision is appropriate when damage is localized, remaining wall thickness exceeds 70–80%, and the expected service life after repair justifies the lower cost compared to replacement. Typical cases include isolated pitting corrosion, single-point leaks, minor mechanical damage from third-party excavation, and gasket or
Pipeline Repair vs Replacement: Criteria, Cost, and When to Repair Read More »
Which pipeline rehabilitation method is best? The best pipeline rehabilitation method depends on pipe condition and project goals. CIPP lining is ideal for structural repair without excavation, pipe bursting is best for collapsed pipes or diameter expansion, slip lining suits large-diameter low-pressure systems, and spray-applied lining is most cost-effective for corrosion protection. What Are Pipeline
Best Pipeline Rehabilitation Methods: CIPP vs Pipe Bursting vs Slip Lining Guide Read More »
Last updated: May 2026 | Based on 500+ trenchless projects and 2024-2026 industry data Reviewed by a licensed Professional Engineer (P.E.) with 15+ years of trenchless pipeline rehabilitation experience and member of NASTT. Is trenchless pipe repair worth it? Yes. Trenchless pipe repair typically reduces costs by 30-60%, shortens project time by 40-70%, and avoids major
How Does Trenchless Pipeline Rehabilitation Work? Read More »
Pipeline repair targets isolated local defects such as cracks or joint leaks without replacing the pipe structure. Pipeline rehabilitation provides continuous structural renewal of an entire pipe segment using trenchless lining methods. The difference between pipeline repair and pipeline rehabilitation is primarily defined by damage scope, structural renewal level, and long-term cost efficiency. Choosing between these approaches depends
Pipeline Repair vs Rehabilitation Read More »
What is pipeline repair and rehabilitation?Pipeline repair and rehabilitation is the process of restoring damaged or aging pipelines using trenchless or minimally invasive methods such as CIPP lining, pipe bursting, and slip lining. These techniques extend pipe lifespan by 30–50 years while reducing costs by 30–60% compared to full excavation. Main pipeline rehabilitation methods include:
What Is Pipeline Repair & Rehabilitation? Read More »
Cured-in-place pipe (CIPP) is the most cost-effective pipeline rehabilitation method for most municipal and residential pipelines, typically reducing total costs by 30–50% compared to open-cut replacement while delivering a 50+ year service life. However, pipe bursting becomes more cost-effective for collapsed or severely damaged pipelines. Slip lining offers the lowest cost for large-diameter gravity systems
Which Pipeline Rehabilitation Method Is Most Cost-Effective? Read More »
English English 
Arabic
Russian
Spanish
French
Vietnamese
Polish
Thai
Indonesian
Turkish
Portuguese
